LED table and chairs

LED table and chairs

Model:Stool:B101

Table:C115

Size:Stool:B101(56x46xH104cm)

Table:C115(Dia.80xH110cm)

Color:16 Colors Changing & customizes color
Light Source:RGBW LED SMD5050
Material:LLDPE Plastic Material
Protection:IP44-IP65
Certification:CE RoHS UL
LED Lifespan(h):50,000-80,000
Power:AC110-240V or rechangeable for option

  • Description
  • Inquiry

Description

LED table and chairs for sale

Colors and 4 lighting way

Our LED table and chairs support 16 color options on the remote control by the free remote control. But if you choose to control the color with your phone, you can choose any color from thousands of RGB colors. Second, there are 4 modes to choose from, such as fade, smooth, strobe, and flash.

Control way

We provide 4 central ways to you. At first, the touch switch at the bottom of the light panel. You just press it, it will be on and off. Second, the RF control, also known as “radio frequency,” RF, can work over much longer distances. Third, IR control, it is quick, efficient, and offers an ability to communicate a wide variety of commands. Its downside is that you always need line-of-sight for it to work properly. If something is in the way, you’re sunk. It also works over relatively short distances. Across a room is about as much as you can expect. At last, DMX control way, if you need to control a lot of glow LED table and chairs, we also can provide the technology to meet you.

The material is the best LLDPE from Thailand

Our all glow LED table and chairs are consists of the plastic shell and inner light LED panel. In this plastic shell, all the shells are original the glow Linear low-density polyethylene (LLDPE). We import the best LLDPE from Thailand then create the glow illuminated LED table and chairs by our equipment. The LLDPE is a substantially linear polymer (polyethylene), with significant numbers of short branches, commonly made by copolymerization of ethylene with longer-chain. LLDPE has higher tensile strength and higher impact and puncture resistance than does LDPE. The LLDPE known as third-generation polyethylene has the properties of polyolefin resin, tensile strength, tear strength, environmental stress cracking resistance, low-temperature resistance, heat resistance, and puncture resistance are particularly superior, and has gained remarkable development – Wikipedia.

In addition, compared with ordinary LDPE and PE, their basic physical properties and forming characteristics are different due to their different molecular structures and melting rheological behaviors. So, our third generation polyethylene shell has three distinct advantages. First, our shells are more resistant to environmental stress cracking than other ordinary plastic shells. This also means that our LED table and chairs are break-proof and anti-cold. You can work normally even if you’re at minus 40 degrees. Second, our LLDPE shell has good heat resistance. This means that our LED table and chairs are less likely to break down in the summer heat. Third, our LLDPE plastic shell has good oil resistance. It means that our LED table and chairs are easier to clean.

RGBW LED SMD 5050

Due to the uneven quality of LED lamp beads, the quality of all light-emitting LED table and chairs vary greatly. There are many LED for us to choose. For example, DIP technology, SMD RGB technology, SMD RGB + W technology and our SMD RGBW technology. First, about the DIP technology light panel. Because there are no white beads directly in the DIP lamp panel, the lamp panel will consume much more energy. Secondly, the RGB SMD technology panel is the same as the previous DIP panel, which consumes a lot of energy. Third, the SMD RGB + W technology has a lamp bead that directly generates white light. However, there are too many welding points on this lamp panel, which wastes too much useful space on the lamp panel, resulting in too dark overall light.

Finally, our RGBW LED SMD 5050 perfectly solves the above problems. The RGBW LED SMD 5050 is actually a ‘quad’ chip, meaning it has for smaller chips in every SMD. So each white LED actually has four chips inside.5050s can also be used for color-changing LED tape, with red, green, blue and white chips inside each LED. By linking this type of RGB LED strip light to a controller, you can mix any shade of any color you choose. Therefore, our LED panel can save more electric energy to work longer time reach to 8~10 hours. At the same time, because of 4 in 1 RGBE LED, our light panel can accommodate more LEDs. So our light panel is lighter than the ordinary light panel.

Solar-powered charging way

Our LED Solar Panel LED table and chairs are the best on solar energy system, voltage stability, Bluetooth control, and after-sales service in Guangdong, China. A lot of factories can’t create solar LED tables and chairs, but luckily we can do it. Moreover, We provided customized service on lighting way, other charging ways, and the shelf.

Application

Make your place gorgeous sparkling:

1 Bar, KTV, Nightclub. This place needs colorful light and it happens that we provide a luminous bar.

2 Wine Party, Birthday Party. Anyway, lighting furniture is indispensable.

3 The exhibition, Show.

4 Hotel, Coffee Houses, and so on. Using the untraditional table to attract more guests.

Factory in China

We are a regular LED table and chairs factory. The factory is in Guangdong, China. So our LED furniture is much lower price than the peer in different countries. As long as you place an order, we can deliver the goods to you directly from the factory.

If you need LED table and chairs, please contact us, you can send an inquiry at the bottom of the page. Due to the time difference, we may reply to you later, but generally not more than 6 hours.